- Home
- Applications
- Oxygen Service
IKV has a full range of fluorinated lubricants including fluids, greases and dispersions which can be used to lubricate components such as ‘O’ rings, fittings, valves and regulators in oxygen service and high pressure air systems. Oxygen reacts with conventional lubricants including mineral and other synthetic oils and greases which greatly increases the potential for explosion or fire.
ZAROX TYN 142 is a special fluorinated grease based upon a mid range viscosity perfluoropolyether (PFPE) fluid. It is non-flammable, white and odourless, offering excellent frictional and lubrication properties.
ZAROX TYN 142 is totally inert both physically and chemically and is totally resistant to all common solvents, chemicals and water. This grease is extremely thermally stable and has a very wide operating temperature range, it is universally compatible with elastomers and plastics and is compatible with oxygen, chlorine and other aggressive chemicals and gases.
ZAROX TYN 142 can easily be applied either manually or by automatic dispensing equipment.
Temperature Range: -40 to 200°C.
IKV FLUOR range
The IKV FLUOR range of lubricants offer long-life in aggressive working conditions.
IKV FLUOR H-1 is a perfluorinated synthetic oil thickened with PTFE. It has excellent lubrication properties at a wide temperature range from -37 ºC to 260 ºC. NLGI grade 1. It is resistant to chemical agents, acids and alkalis, water and vapour. Applications include the lubrication of bearings in conveyor and furnace oven wagons, mechanisms in contact with oxygen, solvents, gas oil, fuel oil and many others.
IKV FLUOR H-2 is a perfluorinated synthetic oil thickened with PTFE. It has excellent lubrication properties across a wide temperature range from -25 ºC to 260 ºC. NLGI grade 2. It is resistant to chemical agents, acids and alkalis, water and vapour. Applications include the lubrication of bearings in conveyor and furnace oven wagons, mechanisms in contact with oxygen, solvents, gas oil and fuel oil, amongst others.
IKV FLUOR H-2/3 is a perfluorinated synthetic oil thickened with PTFE. It has excellent lubrication properties across a wide temperature range from -25 ºC to 260 ºC. NLGI grade 2/3. It is resistant to chemical agents, acids and alkalis, water and vapour. Applications include the lubrication of bearings in conveyor and furnace oven wagons, mechanisms in contact with oxygen, solvents, gas oil, fuel oil, etc.
IKV FLUOR H-3 is a perfluorinated synthetic oil thickened with PTFE. It has with excellent lubrication properties across a wide temperature range of -25 ºC to 260 ºC. NLGI grade 3. It is resistant to chemical agents, acids and alkalis, water and vapour. Applications include the lubrication of bearings in conveyor and furnace oven wagons, mechanisms in contact with oxygen, solvents, gas and fuel oil, etc.
